Repurposed Bench With Faux Grainsack

Ahhhhh. I can finally breathe a sigh of relief. My repurposed coffee table bench is complete! Sorry it took a little longer than I thought. I had put all of the finishing touches on the bench and was about to post the "after" shots, then decided it needed a pleated skirt. It was my first time ever at sewing pleats, and it took forever because I had to sew about 256 inches of  fabric to fit around the bench. Not hard, but not that much fun either.

So what do you think?

I found the topless French-style coffee table abandoned on the curb a few months ago.

Then a couple weeks back my brother broke his bench.

Genius struck and a new bench was born! I painted the coffee table frame with 3 coats of Sherwin Williams Uncertain Grey and removed the upholstered seat from the broken bench. This picture was taken with 1 coat into my painting process (I dry brushed the first layer).

I liked the funky modern feel and considered keeping the dry brush look to go with the faux black leather, but I realized the coffee table frame was sticking out too much on the sides. The bench seat had to be bigger. So I did a complete 180 and reupholstered the seat by adding 2 layers of cotton quilt batting and chose painted dropcloth canvas as my fabric. Using painters tape and dark blue acrylic paint, I used a foam brush to paint 2 sets of parallel lines on each side. Now instead of faux leather, I had my faux grainsack! The fabric and batting were attached using an electric stapler and 3/8" staples.

I actually would have preferred to keep the bench this way to show off the details on the side of the table, but I had to add metal L-shaped brackets to the corners to reinforce the frame and both the wood and metal still showed a tiny bit when I put the bench seat on.

Of course that just wouldn't do! This is where the skirt came in. I decided on pleats and cut the dropcloth fabric 6" long and 256" wide and hemmed the bottom. And here's a little pleating trick of mine that hopefully you find useful in the future! Index cards! Don't know if anyone else has used them before for pleating, but I was pretty proud of myself for coming up with the idea. I chose to make 3" wide pleats and a 3"x5" index card was the perfect little guide.  I folded fabric around the card (frontwards or backwards depending on the pleat) and was able to pin each pleat the exact same width.  The picture below is of my practice ruffles so it shows pleats at different sizes.

After sewing the pleats together, I stapled them beneath the bench seat. I hand-sewed the back where the two ends meet and chose a convenient place where I was able to hide the seam beneath the fold of a pleat. Then I ironed the pleats out so they didn't look so shabby.

Now to the picture-less portion of this post (I was too involved with the process and forgot to get the camera). In order to attach the upholstered seat to the bench, my husband had to help drill holes in the coffee table. In the typical upcycle style, we used the original screws from the old bench. It took 1 larger drill bit for the screw to go in and a smaller drill bit so that the screw head wouldn't fall out. After a couple test runs he was able to successfully drill 8 perfect holes for the bench. Woohoo! No yelling or cursing from either of our mouths. A proud moment for us :).

Finally, she's ready for the big time! My first furniture repurpose project is a success! And both the table and the seat were free. Yippee!

And sorry to everyone who hasn't heard from me lately. There's always so much to do and so little personal time that blogging and everything that goes with it has been on the backburner. Don't think I've become unfriendly and distant though! It's still me :)

Love the Beasts,

Emily

Linking to:

Sneak Peek At My Coffee Table Bench

In my last post I mentioned that my brother's upholstered bench top was a little smaller than the coffee table frame, but I was planning on leaving it that way. It didn't bother me or him that the wood frame was sticking out further than the top. Of course a day later, I completely changed my mind. It was bothering me a lot. Especially after I added L-shaped metal brackets to each corner of the frame. I was afraid the joins in the sides of the table weren't strong enough, so my husband helped me come up with the idea of adding the brackets. Anyways, the metal was sticking out beyond the bench top and made the size difference much more obvious.

So I had a new plan and told my brother that the bench probably wouldn't match his bedroom anymore. I decided to add a couple layers of batting to the outside of the bench top so that it would cover more area, and recover it with a different fabric. I painted some dark blue stripes on dropcloth with the help of painter's tape and it turned out perfect. Well perfect for me, not my brother.

Here's the sneak peek:

Love the Beasts,

Emily

Reviving A Sad Curbside Coffee Table

I found this French-style coffee table frame a few months ago on the curb. It had no top, which made it look pretty sad, but I figured I could do something interesting with it at some point in the future.

When my brother broke his upholstered bedroom bench a couple days ago I realized the coffee table's time had come. My brother's style is modern so I didn't think I'd be able to refurbish any of his furniture at any point, but the fake leather bench top didn't look half bad with the French-style look. It actually looked pretty darn nice. I got lucky that the top fit the coffee table frame (it's a tiny bit shorter but my brother said he wouldn't mind if some of the wood stuck out further than the bench top).

I've already painted the coffee table frame a nice light grey and I'll be working with my husband over the long weekend to make it more structurally sound. For now, you can imagine what it will look like from this picture.

And you may have noticed my blog background has gone through a few changes. I finally found one with the right colors and look. Yippee! Hope you didn't suffer to much from my temporary madness!

Love the Beasts,
Emily